CURL LASHES
STEP 1
Curl your lashes with a lash curler before applying the magnetic lashes.
PREP LASHES
STEP 2
Pull the top and bottom lashes apart by holding both ends of the lash with your thumb and use your thumb to push the lash upwards.
APPLY LASHES ON APPLICATOR
STEP 3
- Place the top lash (UP) on the upper clip of the applicator.
- Place the bottom lash (DOWN) on the lower clip of the applicator.
Make sure the white markings on both sides are facing each other.
⚠ If the white markings are not facing each other, they will not clip together.
POSITION ➝ SNAP ➝ GO
STEP 4
- Hold the applicator (UP) close to your lash line and position for the lashes to sit right at the root of your natural lashes.
- Once aligned, gently press the bottom applicator closed. The magnets will snap together, securing the lashes perfectly in place.
- Finally, release the applicator and you’re ready to go!
🌟For best results, look slightly down into the mirror while applying to get the perfect angle.
TRIM LASH LENGTH
OPTIONAL STEP
If the magnetic lashes are too long for your eye shape, you can carefully trim the ends to achieve a better fit. Start by trimming just a small amount from each outer edge.
REMOVAL
Gently pull the lash close to the band from the centre.
Do not pull the lashes individually.
CLEANING
Use a cotton swab with makeup remover
to gently wipe off any residue on the
magnetic lashes.
Avoid soaking the lashes or
using oil-based products.
CARE
Always store lashes are use in original
case, away from dust, moisture and
heat.
EXPLORE OUR WINX COLLECTION